SPC-700 instruction set

The Sony SPC-700 CPU is part of the S-SMP sound processor of the SNES. It runs at 2.048 MHz, and behaves similarly to a 6502 at 1.024 MHz with some extensions.

Architecture

The SPC-700 has a 16-bit address space, and a similar set of registers to the 6502.

Registers

• A - 8-bit accumulator
• X - 8-bit index
• Y - 8-bit index
• YA - 16-bit pair of A (lsb) and Y (msb).
• PC - program counter
• SP - stack pointer
• PSW - program status word: NVPBHIZC
  • N - negative flag (high bit of result was set)
  • V - overflow flag (signed overflow indication)
  • P - direct page flag (moves the direct page to $0100 if set)
  • H - half carry flag (carry between low and high nibble)
  • I - interrupt disable (unused: the S-SMP has no attached interrupts)
  • Z - zero flag (set if last result was zero)
  • C - carry flag

Differences from the 6502:

• A 16-bit combined YA register is available for some operations.
• The direct page can be moved to $0100. (Rarely used.)
• A half carry flag that is useful for nibble operations.
• No decimal mode.

Addressing Modes

• imm - 8-bit immediate value
• dp - 8-bit direct page offset ($0000+dp or $01000+dp)
• !abs - 16-bit absolute address
• rel - relative offset in two's complement
• (addr) - indirect
• (addr)+i - indirect indexed (add index after lookup)
• [addr+i] - indexed indirect (add index before lookup)

Instructions

Official instruction names and syntax for SPC-700 instruction were provided by Sony. However, because of its architectural similarity to 6502, some prefer to rename and remap them using a 6502 style syntax. Both are provided here.

SPC-700 Instruction Set

Instruction	6502-Style	Opcode	Bytes	Cycles	Flags	Notes
TODO

Links

• SPC700 Reference - CPU Instruction Set at superfamicom.org wiki