SPC-700 instruction set

The Sony SPC-700 CPU is part of the S-SMP sound processor of the SNES. It runs at 2.048 MHz, and behaves similarly to a 6502 at 1.024 MHz with some extensions.

Architecture

The SPC-700 has a 16-bit address space, and a similar set of registers to the 6502.

Registers

• A - 8-bit accumulator
• X - 8-bit index
• Y - 8-bit index
• YA - 16-bit pair of A (lsb) and Y (msb).
• PC - program counter
• SP - stack pointer
• PSW - program status word: NVPBHIZC
  • N - negative flag (high bit of result was set)
  • V - overflow flag (signed overflow indication)
  • P - direct page flag (moves the direct page to $0100 if set)
  • H - half carry flag (carry between low and high nibble)
  • I - interrupt disable (unused: the S-SMP has no attached interrupts)
  • Z - zero flag (set if last result was zero)
  • C - carry flag

Differences from the 6502:

• A 16-bit combined YA register is available for some operations.
• The direct page can be moved to $0100. (Rarely used.)
• A half carry flag that is useful for nibble operations.
• No decimal mode.

Addressing Modes

• imm - 8-bit immediate value
• dp - 8-bit direct page offset ($0000+dp or $01000+dp)
• !abs - 16-bit absolute address
• rel - relative offset in two's complement
• (i) - direct-page relative index (P * $100 + i)
• (i)+ - direct-page relative index with post-increment (i is incremented after read)
• [addr]+i - indirect indexed (add index after lookup)
• [addr+i] - indexed indirect (add index before lookup)

Instructions

Official instruction names and syntax for SPC-700 instruction were provided by Sony. However, because of its architectural similarity to 6502, some prefer to rename and remap them using a 6502 style syntax. Both are provided here.

Cycles in this table are 1.024 MHz CPU cycles. Each one is equal to 2 clocks of the 2.048 Mhz S-SMP.

SPC-700 Instruction Set

Instruction	6502-Style	Opcode	Bytes	Cycles	Flags	Notes
8-bit move memory to register
MOV A, #imm	LDA #imm	E8	2	2	N......Z
MOV A, (X)	?	E6	1	3	N......Z
MOV A, (X)+	?	BF	1	4	N......Z	X++ after read
MOV A, dp	LDA zp	E4	2	3	N......Z
MOV A, dp+X	LDA zp, X	F4	2	4	N......Z
MOV A, !abs	LDA abs	E5	3	4	N......Z
MOV A, !abs+X	LDA abs, X	F5	3	5	N......Z
MOV A, !abs+Y	LDA abs, Y	F6	3	5	N......Z
MOV A, [dp+X]	LDA (zp, X)	E7	2	6	N......Z
MOV A, [dp]+Y	LDA (dp), Y	F7	2	6	N......Z
MOV X, #imm	LDX #imm	CD	2	2	N......Z
MOV X, dp	LDX zp	F8	2	3	N......Z
MOV X, dp+Y	LDX zp, Y	F9	2	4	N......Z
MOV X, !abs	LDX abs	E9	3	4	N......Z
MOV Y, #imm	LDY #imm	8D	2	2	N......Z
MOV Y, dp	LDY zp	EB	2	3	N......Z
MOV Y, dp+X	LDY zp, X	FB	2	4	N......Z
MOV Y, !abs	LDY abs	EC	3	4	N......Z
8-bit move register to memory
MOV (X), A	?	C6	1	4	........
MOV (X)+, A	?	AF	1	4	........	X++ after read
MOV dp, A	STA zp	C4	2	4	........
MOV dp+X, A	STA zp, X	D4	2	5	........
MOV !abs, A	STA abs	C5	3	5	........
MOV !abs+X, A	STA abs, X	D5	3	6	........
MOV !abs+Y, A	STA abs, Y	D6	3	6	........
MOV [dp+X], A	STA (zp, X)	C7	2	7	........
MOV [dp]+Y, A	STA (zp), Y	D7	2	7	........
MOV dp, X	STX zp	D8	2	4	........
MOV dp+Y, X	STX zp, Y	D9	2	5	........
MOV !abs, X	STX abs	C9	3	5	........
MOV dp, Y	STY zp	CB	2	4	........
MOV dp+X, Y	STY zp, X	DB	2	5	........
MOV !abs, Y	STY abs	CC	3	5	........
TODO

Links

• SPC700 Reference - CPU Instruction Set at superfamicom.org wiki