Timing
From SNESdev Wiki
Jump to navigationJump to search
Timing of the SNES hardware.
Master Clock
The SNES master clock:
- NTSC 21.447 MHz
- PAL 21.281 MHz
CPU
A 65816 CPU "cycle" can take 6, 8 or 12 master cycles on the SNES, depending on the memory region accessed, and the MEMSEL fast-ROM setting.
This gives some commonly quoted SNES CPU speeds, though none of them tell a complete story:
- 3.58 MHz fast-ROM (6-cycle)
- 2.68 MHz slow-ROM (8-cycle)
- 1.79 MHz other (12-cycle)
The speed of access depends on the memory region:[1]
- 6-cycles for fast-ROM access, enabled via MEMSEL and accessed at an address of $800000 of higher.
- 8-cycles for slow-ROM access.
- 8-cycles for internal WRAM.
- 6-cycles for most MMIO registers.
- 12-cycles for JOYSER0 and JOYSER1.
- 6-cycles for "internal" cycles not accessing memory (e.g. 2nd cycle of NOP)
Video
TODO:
- Cycles per scanline
- Cycles per frame
- Cycles per vblank
- Vblank DMA budgets
- Scanlines per frame